Taycan Turbo GT

3D štampano tijelo sjedala s punim sjedalom s tvrdom tvrdoćom

The 3D printed bodyform full-bucket seat (seat cushion and the seat backrest) combines maximum functionality with individual design. The seat cushion and the seat backrest of the full-bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive air conditioning and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing. As a visual highlight, the visible grille elements on the cushion and backrest are available in various colours.

The 3D printed bodyform full-bucket seat can be installed and removed again in a few simple steps. Compatible with both 3- and 6-point seat belts. Includes a practical transport bag.

The choice of the degree of hardness of the seat cushion and seat backrest depends on the individual feeling and the desired use (e.g. circuit or long-distance driving). The following recommendations can serve as a guide:
- degree of hardness soft: recommended for a body weight of up to approx. 80 kg (hardness level softer compared to the full-bucket seat)
- degree of hardness medium: recommended for a body weight of approx. 60 kg to approx. 100 kg (hardness level comparable to the full-bucket seat)
- degree of hardness level hard: recommended for a body weight from approx. 70 kg (hardness level harder compared to the full-bucket seat)

Note: only for vehicles with full-bucket seats. Installation on driver's side only. Colour coordination of the design elements with the selected interior is recommended

Dodaj u izbor

Taycan Turbo GT

Taycan Turbo GT

Taycan Turbo GT

Boje eksterijera

Kontrast

Nijanse

Snovi

Legende

Boja po uzorku

Točkovi

21-inch

Obojene felge

Pribor za felge

Boje i materijal unutrašnjosti

Race-Tex s opsežnim detaljima od kože

Koža

Sjedišta

Sportska sjedišta plus

Potpuna sportska sjedišta

Druge opcije sjedišta

Eksterijer

Dizajn eksterijera

Sistemi za krov i transport

Natpisi i naljepnice

Svjetla i vizija

Enterijer

Paketi unutrašnjosti i dekori/materijali

Sigurnosni pojasevi i dizajn sjedala

Volan, poluga mjenjača/selector

Dizajn unutrašnjosti

Izbor boje kože/dekorativni šavovi

Ključevi, prostirke i novčanici

Tehnologija

Pogon i performanse

Sistemi pomoći

Komfor i svakodnevna upotrebljivost

Infotainment (zabava i informacija)

Punjenje i domet

Naše preporuke

Taycan Turbo GT

Vaša odabrana oprema

Vanjske boje i točkovi

Boje unutrašnjosti i sjedišta

Tehnologija

Taycan Turbo GT

Instalacijske usluge

3D štampano tijelo sjedala s punim sjedalom s tvrdom tvrdoćom