718 Boxster S

350 PS

Power (PS)

4.4 s

Acceleration 0 - 100 km/h

285 km/h

Top speed

420 Nm

Max. torque

Number of cylinders

2,497 cm³

Displacement

1,385 kg

Unladen weight (DIN)

4,379 x 1,994 x 1,271 mm

Length/Width (with mirrors)/Height

Number of cylinders

Bore

102.0 mm

Stroke

76.4 mm

Displacement

2,497 cm³

Power (kW)

257 kW

Power (PS)

350 PS

RPM point maximum power

6,500 1/min

Maximum engine speed

7,500 1/min

Max. torque

420 Nm

RPM range maximum torque

2,100 - 4,500 1/min

Max. output per liter (kW/l)

102.00 kW/l

Max. output per liter (PS/l)

140.00 PS/l

Sound level of stationary vehicle

93 dB(A)

Sound level of stationary vehicle (rpm)

3,750 1/min

Sound level of passing vehicle

70 dB(A)

Fuel consumption urban

12.8 l/100 km

Fuel consumption extra-urban

7.0 l/100 km

Fuel consumption combined

9.1 l/100 km

CO2 emissions combined

208 g/km

Length

4,379 mm

Width

1,801 mm

Width (with mirrors)

1,994 mm

Height

1,271 mm

Wheelbase

2,475 mm

Unladen weight (DIN)

1,385 kg

Unladen weight (EU)

1,460 kg

Permissible gross weight

1,695 kg

Maximum load

310 kg

Luggage compartment volume, front

150 l

Luggage compartment volume, rear V210-1

122 l

Top speed

285 km/h

Acceleration 0 - 100 km/h

4.4 s

Acceleration 0 - 100 km/h with Sport Chrono Package

4.2 s

Acceleration 0 - 160 km/h

9.5 s

Acceleration 0 - 160 km/h with Sport Chrono Package

9.2 s

Acceleration 0 - 200 km/h

15.0 s

Acceleration 0 - 200 km/h with Sport Chrono Package

14.7 s

In-gear acceleration (80-120km/h) (50-75 mph)

2.8 s

Open Configurator

Back to model series selection

Which 718 would you like to configure?

I already have a configuration

Do you already have a configuration?

Load saved configuration

Filter

Show Porsche

Reset All Filters

Would you like to transfer your configuration?

If you choose a new model within the same model series, most of the equipment in your current configuration can be transferred to the new model. In some cases, equipment is only available for certain models and may therefore not be adopted for the new model.

Transfer configuration

Start with standard equipment