The 3D printed bodyform full bucket seat combines maximum functionality with individual design. The seat cushion and the seat backrest of the full bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive cooling and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing. As a visual highlight, the visible grille elements on the cushion and backrest are available in various colors.
The 3D-printed bodyform full bucket seat can be installed and removed again in a few simple steps. Includes a practical transport bag.
The choice of the degree of hardness of the seat cushion and seat backrest depends on the individual feeling and the desired use (e.g. track or long-distance driving). The following recommendations can serve as a guide.
- Soft: Recommended for a body weight of up to approximately 175 lbs (hardness level softer compared to the standard cushion)
- Medium: Recommended for a body weight between approximately 130 lbs - 220 lbs (hardness level comparable to the standard cushion)
- Hard: Recommended for a body weight from approximately 155 lbs (hardness level harder compared to the standard cushion)
Note: Only for vehicles with Full Bucket Seats. Installation on driver's side only. Color coordination of the design elements along with the selected interior is recommended. The 3D-Printed Bodyform seat insert will come installed in the vehicle and the standard seat insert will be included in the transport bag.
